Overview 

The Tangible Fixed Assets area of CCH Corporation Tax shows the totals of the fixed asset note from the accounts and there are screens to itemise the Additions and Disposals that make up the these totals. There is a panel that reconciles the detailed Additions and Disposals to the Tangible Fixed Assets totals. The Additions and Disposals are allocated to pools and are used to calculate Capital Allowances. The Tangible Fixed Assets area of Corporation Tax is shown below with links to the Additions and Disposals. 

CCH_Fixed_Asset_Register_Updating_Corporation_Tax_1.png

When CCH Accounts Production is in use, the data in the Tangible Fixed Assets area can be imported into Corporation Tax from Accounts Production and the Fixed Asset Register: 

  • CCH Accounts Production data comes from the fixed asset note in the accounts. This accounts page supplies the headings and the totals shown in the Tangible Fixed Assets screen above. 
  • CCH Fixed Asset Register supplies the detailed Additions and Disposals. 

This topic discusses how the link from CCH Fixed Asset Register to CCH Corporation Tax is set up and run. The areas discussed are: 

  • Setting Up the Tax Links screen This explains how the link between CCH Fixed Asset Register and CCH Corporation Tax is set up. 
  • Exporting the data from Accounts Production explains how data is exported from CCH Accounts Production into a "holding area" before it can be imported into CCH Corporation Tax. 
  • Importing the data into CCH Corporation Tax explains how the data can be brought from the "holding area" into CCH Corporation Tax. 
  • Editing Additions and Disposals in CCH Corporation Tax explains how extra tax data can be added to Additions and Disposals in CCH Corporation Tax after they have been imported from CCH Fixed Asset Register. 
CCH_Fixed_Asset_Register_Updating_Corporation_Tax_2.png

Setting up the Tax Links screen 

The Tax Links screen appears when you open a limited company client. It is used to specify what data is brought into CCH Corporation Tax from CCH Accounts Production and the Fixed Asset Register. 

The settings are as follows: 

  • Update automatically Corporation Tax is automatically updated from CCH Accounts Production when a Period of Account is opened without needing to click Update from Accounts. 
  • CCH Accounts Production link - Balance sheet If this option is ticked then CCH Fixed Asset Register data is imported into CCH Corporation Tax along with other Balance Sheet data. This setting can be different for each Period of Account. If it is not ticked, then the CCH Fixed Asset Register is "unlinked" from Corporation Tax. This means that no data is imported from the CCH Fixed Asset Register into Corporation Tax. It also means that any data previously imported, i.e. when it was linked, can be freely edited. 

Notes 

  • Although Update automatically causes the data to be read automatically into CCH Corporation Tax, it still needs to be exported from CCH Accounts Production into a holding area first. 
  • The settings CCH Accounts Production link - Profit & Loss, CCH Accounts Production link - Basic, Update primary trade and CCH Accounts Production link - Balance sheet affect what data is imported from CCH Accounts Production and are described in the CCH Corporation Tax Help. 
  • There are some differences between how the Tax Links screen is used with the CCH Fixed Asset Register and how it is used for other data in CCH Accounts Production. These are explained in the Reference section. 

Exporting the data from CCH Accounts Production 

The Fixed Asset Register data is imported into CCH Corporation Tax alongside the CCH Accounts Production data. Accounts Production data must be exported into a "holding area" before it can be imported into CCH Corporation Tax. To import CCH Fixed Asset Register data you must export the CCH Accounts Production data first. Otherwise the system will report that there is "Nothing to import". 

To export the data from CCH Accounts Production: 

  • Go into the relevant Accounting Period in CCH Accounts Production 
  • Click Tax Link followed by Update Tax on the Ribbon 
  • The system asks "Mark the Tax Link data as Draft?" This question has no effect when exporting to Corporation Tax. Answer No and click Continue. 
  • The system reports "Update complete". 

The CCH Accounts Production Tax Link screen is shown below. 

CCH_Fixed_Asset_Register_Updating_Corporation_Tax_2A.png

Notes

  • On the screen above the Tax Link option is highlighted and Update Tax is shown on the Ribbon. 
  • The right hand part of the screen shows what is called the "Basic Profit and loss data" but this is not relevant to the export of CCH Fixed Asset Register data. 

Importing the data into CCH Corporation Tax 

How data is imported into CCH Corporation Tax depends on whether Update automatically is ticked on the Tax Links screen above. 

  • If Update automatically is ticked, then the CCH Accounts Production data and CCH Fixed Asset Register data are imported as soon as the user goes into the Period of Account. 
  • If Update automatically is not ticked then you can either click Update from Accounts in the Ribbon or click the warning in the Errors and Exceptions panel that "CCH Accounts Production information has changed and is available..." Both options are highlighted below. 
CCH_Fixed_Asset_Register_Updating_Corporation_Tax_3.png

Notes

  • The warning in the Errors and Exceptions panel can also appear if Update automatically is ticked. This happens if you have both CCH Accounts Production and CCH Corporation Tax open at the same time. If you click Update Tax in CCH Accounts Production then the warning immediately appears in Corporation Tax saving you from exiting CCH Corporation Tax and going back in to import the new data. 
  • You may notice that the Fixed Asset Register icon is visible in CCH Corporation Tax. It is enabled when you are in the Tangible Fixed Asset area and allows you to go into the CCH Fixed Asset Register directly from Corporation Tax. 

Editing Additions and Disposals in CCH Corporation Tax 

Once Additions and Disposals have been imported into CCH Corporation Tax from the CCH Fixed Asset Register there is further data that tax personnel need to add to the records. The screen below shows a single Addition that has been imported from CCH Fixed Asset Register. 
 

CCH_Fixed_Asset_Register_Updating_Corporation_Tax_4.png

Notes 

  • Some fields come from the CCH Fixed Asset Register, such as the asset Description. These fields are greyed out and disabled. To change them you need to update the Fixed Asset Register. 
  • Some fields, such as Tax Value and Pool Type, do not exist in the CCH Fixed Asset Register. These are enabled and you can complete them in Corporation Tax. 
  • The last field shows Updated from FAR to indicate that this Addition has been imported from the Fixed Asset Register. 
  • The Balance Sheet category field is a special case. It comes from the asset's Asset Class. If the Balance Sheet category in the Fixed Asset Register matches the heading of one of the columns of the Tangible Fixed Assets screen, then the field is disabled. In the example above the Balance Sheet category in the Fixed Asset Register is "Fixtures and Fittings". This matches a column heading in the Tangible Fixed Asset screen (which in turn came from the text on the fixed asset note in the accounts). So the field is disabled. But if the Balance Sheet category does not match then the field is enabled and you can select it in a drop down. 
  • If you make changes in CCH Corporation Tax and then reimport the data from the CCH Fixed Asset Register, your changes are not lost. When the new records are imported, the fields that came from the CCH Fixed Asset Register are updated and your changes are retained. 
  • Although the Fixed Asset Register fields on each entry are usually disabled in CCH Corporation Tax, there is a way around this. If you "unlink" the CCH Fixed Asset Register from CCH Corporation Tax, no further changes are imported from the CCH Fixed Asset Register and the data that is already present in CCH Corporation Tax becomes fully editable. To unlink the CCH Fixed Asset Register, untick CCH Accounts Production link - Balance sheet for the relevant period of account on the Tax Links screen. 
  • Editing Disposals is done in the same way as editing Additions. 

Related documents

Year End
The document outlines the procedure for performing a year-end in the CCH Fixed Asset Register (FAR). No special process is required, but the system prevents progression if the nominal ledger does not reconcile with the FAR or if an asset movement has occurred since the last depreciation posting. The system provides warnings at year-end but not at other times, such as when printing accounts. Users are advised to finalize accounts in CCH to prevent earlier period reconciling issues.
Updating CCH Personal Tax
Updating CCH Personal Tax
Creating a Fixed Asset Register
The document provides instructions on how to access and set up the Fixed Asset Register within CCH Accounts Production. It outlines the steps to open an accounting period, configure asset code generation, and manage depreciation calculations. Users can customize settings on the Periods screen, and establish Asset Classes for various asset types, detailing associated nominal accounts for control and depreciation postings. The setup can be expedited using defaults from Master Asset Classes.
Posting Depreciation
The document outlines the process for managing depreciation within a system that automatically recalculates it after each asset movement. Users can generate a Fixed Asset Report and post depreciation entries back to CCH Accounts Production via designated options. Three journal entries are created: the Depreciation Journal, Revaluation Journal, and Profit/Loss on Disposal Journal, each serving specific accounting functions. The document also notes that rerunning the depreciation process replaces previous entries, and users must navigate away from the posting screen to view updated data in Accounts Production.
Buying and Selling Assets
The document outlines procedures for managing asset additions and disposals in CCH Accounts Production and the Fixed Asset Register. For asset additions, users can either continue data entry without reconciling the ledger or add the asset directly, defaulting necessary data from Accounts Production. For asset disposals, the same options apply, with a focus on reconciling asset sales. The document emphasizes that both processes can involve one or multiple assets and provide guidance for subsequent data entry in the respective systems.